如何泵自行车轮胎

如何泵自行车胎在9个简单步骤

有一个扁平或湿软的自行车轮胎?我们列出了如何在九个简单的步骤泵自行车轮胎。

充气轮胎将会帮助你the most out of your bike ride.伴随着的是,保持适当的胎压确保安全,顺畅不管什么曲折的道路或岩石步道你发现自己巡航下来。

Luckily, pumping a bike tire is a fairly simple and manageable task as long as you know what you need. We’ll cover the different bike pumps, valves, and techniques for airing up your bike tires.

Note that if you think you have a flat tire or a slow leak, you’ll probably want to改变管。If your tires simply need more air, follow these nine steps for a quick and necessary fix.

How to Pump a Bike Tire

1. Acquire the necessary bike pump for your bike’s tire valve.

根据你的自行车,自行车轮胎将有一张法式气门嘴或气门嘴。如果你不知道哪个是哪个,我们在这篇文章的末尾提供的照片中的常见问题。

Once you know what type of valve you’re working with, make sure your bike pump is compatible with that type of valve. Most bike pumps work with Schrader valves. You may need an additional adapter if your bike tire has a Presta valve.

You can either use a floor pump or a hand pump. Below, we outline how to pump a bike tire with both types of pumps.

2. Determine the tire pressure needed for your bike.

不要overinflate或underinflate你的自行车轮胎。看看你的自行车轮胎的侧壁,以确定最小和最大推荐轮胎压力,这将在PSI进行测量。

一般的经验法则是,公路自行车的轮胎需要比山地自行车或混合动力轮胎更高的PSI。一般情况下,建议是80-130磅的公路自行车,40-70磅的巡洋舰自行车或混合型轮胎,以及25-35磅的山地自行车。

如何泵自行车轮胎

3. Unscrew the cap from the valve.

无论法式气门嘴和施拉德阀通常有塑料盖,你需要删除。一定要保存帽的地方,你不会失去它,就像你的后面的口袋里。盖的目的是保持灰尘或碎屑从阀开口的。

如果你有一个法式气门嘴,拧开锁紧螺母除了取下盖子。打开法式气门嘴几个旋转连接泵之前,打开阀门。如果你有一个气门嘴,这个额外的步骤将没有必要。

4. Place the pump on the valve.

There are a couple of different types of bike pumps. A坐地泵is a great option to store in your garage and have at the ready for whenever you need to refill your tires at home. Overall, floor pumps have higher capacity and can pump bike tires up to a max tire pressure of 160 psi (which is more than you’d need).

Hand pumpsare portable pumps that you can bring with you on a bike ride or in your car. If you’re a long-distance cyclist, a regular bike commuter, or a solo rider, a hand pump is a worthwhile investment.

通常情况下,这两种地板泵和手动泵有两个出水孔,以适应Presta的都和施拉德阀。通过选择正确的喷嘴,将其推到该阀放置在阀的泵。

5. Pull up the pump lever.

现在,该泵在阀门,它几乎是时候开始抽水。大多数自行车泵具有一个杆,其需要被旋转90度。说明这个过程取决于泵,所以请您的具体泵的说明。

6. Inflate the tire.

现在,泵牢固地固定在自行车轮胎的气门,它的时间泵!这一步是不言自明。对于坐地泵,提上双方你的脚,并开始用双手抽。

For a hand pump, use one hand to hold the nozzle onto the valve and use the other hand to pump. Not all hand pumps have pressure gauges, but we recommend getting one with a pressure gauge, as “eyeing” the tire isn’t the best way to determine tire pressure.

泵,直到达到所需的空气压力。

7.从阀的泵。

If you had to pull up a pump lever, push the lever back down. Then, pull the nozzle off of the valve. Note that you may hear a little bit of air escaping as you remove the pump. This is completely normal and should not make a substantial change to the tire pressure.

8.如果你过度充气,删除一些空气达到正确磅。

对于气门嘴,请与你的指甲,直到足够的空气逸出阀门。对于法式气门嘴,用锁紧螺母打开,按下阀门,直到足够的空气逸出。

9.关闭该阀。

对于一个施拉德阀,简单地说阀上的塑料防尘帽回来。对于一个法式气门嘴,一定要拧闭合锁紧螺母,然后把在塑料防尘帽回来。

如果你已经抽了正确的PSI的参数范围内的轮胎,轮胎应该感到公司。现在,回来的路上,小径上你走!

People Riding Mountain Bikes Photo Credit Andy B
图片来源:安迪乙

How to Pump a Bike Tire FAQ

我如何才能知道什么类型的轮胎气门嘴我的自行车有吗?

一个法式气门嘴has a lock nut at the top of the stem that allows you to open and close the valve. Depending on your bike pump, you may need a Presta valve adapter. Typically, Presta valves are found on road bikes and山地自行车。Presta的阀是,平均来说,更缩小和来在各种干长度。

一个Schrader valve通常在BMX自行车找到。该阀是同一类型的对汽车轮胎中发现阀门。大多数自行车泵将在气门嘴工作,而无需适配器。

如何泵自行车轮胎
法式气门嘴(左)和气门嘴(右)

应我的自行车轮胎是什么压力?

最小和最大PSI应该在你的自行车轮胎的侧面标明。请确保您按照制造商的建议,以确定正确的PSI。

一般情况下,推荐的轮胎压力80-130 psi for road bikes, 40-70 psi for cruiser bikes or hybrid tires, and 25-35 psi for mountain bikes.

To figure out the ideal tire pressure for you, consider your weight. If you’re a lightweight rider, stay on the lower end of the recommended psi range. And if you’re heavier, go with the higher psi.

我应该如何经常检查我的自行车轮胎的压力?

你多久检查轮胎气压将取决于你骑如何经常你的自行车。不管你骑多久,你应该检查你的轮胎气压的习惯。有人检查每程前轮胎气压。其他检查其轮胎气压每周一次。

什么是最好的自行车轮胎泵?

有两种主要类型的自行车泵:坐地泵和手泵。

一个坐地泵是一个很好的选择在车库里,以保持存储,准备使用时,它需要 - 无论你是你的骑自行车之前每周或每天补充轮胎。

Overall, floor pumps have higher capacity and can pump bike tires up to a max tire pressure of 160 psi, which is more than you need. The smaller nozzle hole is for a Presta Valve.

For a floor pump, we recommend theBV Bicycle Floor Pump

Hand pumpsare portable pumps you take on bike ride or store in your car. They’re handy to have if you ever need to pump up your tires while out on a ride.

对于手动泵,我们推荐Pro Bike Tool Bike Pump

如何泵自行车轮胎
BV Bicycle Floor Pump(left) and专业自行车工具手泵(right)

Can I deflate a bike tire after putting too much air in it?

Yes, you can! If you accidentally overinflate a bike tire, you can easily remove some of the air until you reach the correct psi. For a Schrader valve, press on the bike tire’s valve with your fingernail until enough air escapes. For a Presta valve, open the lock nut and press on the valve until enough air escapes.

Support us! GearJunkie may earn a small commission from affiliate links in this article.Learn more
Joybeth Sullivan
By

Joybeth是科罗拉多州丹佛市的一个全新的居民,最近从佐治亚大学毕业,英语和娱乐与媒体研究学位。你可以找到她以外的任何地方与美丽的景色沿着她的德国牧羊犬的同伴,碧玉。她喜欢所有的东西摄影,电影和诗歌。并希望她会远足fourteener不久的将来!

vwin真人荷官主题: